| |
Handy Baby 2 Function List:
1.RD & CP: Identification chip /Edit Chip data / Deco chip / Copy chip
2.Chip-fun: Generate chip/Chip simulate/Chip transfer
3.Det-manu: Frequency test/ Data test/ signal detect
4.Remote: Remote renew/FIX CODE clone/Fixed code/JMD remote renew (JMD remote by JMD APP)
5.card-cp: Copy ID/IC card
6.Assistant: Copy Audi/VW 4th / Audi 5th/Audi ID8E/Assistant online(All key lost)/Assistant information
7.More-fun: Functional introduction/Simulate as transponder/ECO Mode
8.96bits-dec: Deco 96bits 48 and copy
9.Setup: Bluetooth/Voice/Volume/Brightness ersion/Function list/APP QR code
Handy Bay: Living for the locksmith, Saving for the locksmith
Different Between Handy Baby 2 and Handy Baby:
Key Copy Programmer Recognize and Copy:
Recognize: Recognize chip 13, 40/41/42/44/45, 4C/46/48, 4D61/62/63/67/68/68/71. Able to tell if 48 chip is from original or deputy factory.
Copy: Copy 46, 4D and a partial of original 48 I.E Buick Excelle, you have to use special GMT46/4D Chips, ID48 chips which can change ID.
Operation steps:
Turn on: long press the "On" button.
Turn off: long press the "On / off" button or "On / off" and "OK" button
Steps to operate: follow the tips on the screen, put the original key into the coil, press "OK" to recognize.
Take chip 46, 4D and 48 for example.
Steps to copy 46:
1. Press "OK" to decode
2. Make antenna close to coil
3. Insert and turn the key (collection)
4. Put original key into coil to decode
5. Put new key into coil to copy
Steps to copy 4D:
Press "OK" to decode, then put new key into coil to copy.
Steps to copy 48:
Press "OK" to decode, then put new key into coil to copy.
Handy Baby Key Copy Programmer Initialize:
Please use with caution:
Only available for JMD46 / 4D and revisable UID48 chip. The data won't be restored after the chip erased.
Enter program, select the chip type, press "OK" to restore to factory settings.
Handy Baby Key Programmer Test Frequency:
Enter program, make key close to the surface of left button, meanwhile press remote button, then the frequency will display.
Handy Baby Key Copy Programmer Data read and write:
1) Read and write 46 chip
1. Please select correct chip mode and password in order to read & write chip correctly. The device default chip mode and password is 46 chip blank.
2. Select chip mode: move mouse cursor to "Mode", I.E "Plaintext mode", press "OK", the fonts turn black from white to indicate the selection mode, press "Up" and "Down" to select the Plaintext mode or password mode.
3. Enter password: move cursor to the password box under the mode, press "OK" to proceed, press "Up" and "Down" to select the data (0`F), press "Left" and "Right" to transfer password.
4. After finish press "OK"to exit, then move cursor to "Read all" to read out data.
5. Read all: read out all data for 46 chip and display the status of locked or unlocked.
6. Write: write the corresponding data; make sure 46 unlocked before writing data.
7. Enter data: the way to enter data is as the same as to enter password.
2) Read and write 48 chip
1. Read: read out 48 chip UID, user 1 and user 2 data, and display 48 chip type as well as the status of locked or unlocked.
2. Write: write the corresponding area data; make sure 48 unlocked before writing data.
3. Enter data: move cursor to the data input box, press "OK" to proceed, press "Up" and "Down" to select the data (0`F), press "Left" and "Right" to transfer password. After finish press "OK" button to exit, move cursor to "Write" to write data.
4. Unlock: if the chip is locked, then it needs to be unlocked before writing into data.
5. Steps: when the chip is read out locked, please enter PIN code which is the code of 48 chip, move cursor to "Unlock", press "OK" to unlock.
3) Read and write 4D chip
1. Read: read out 4D chip password, recognition and ID data, also display their status of unlocked or locked.
2. Enter data: move cursor to the data input box, press "OK" button to proceed, press "Up" and "Down" to select the data (0`F), press "Left" and "Right" to transfer password. After finish press "OK" to exit, move cursor to "Write" to write data.
3. Write: write the corresponding area data; make sure 4D unlocked before writing data.
4. Lock: lock the corresponding area, note: it is unable to unlock after locked.
5. Car ignition check: enter the verification code, then it will return corresponding signature.
4. Other chips
Able to recognize chip 13,40/41/42/44/45,4C/46/48,4D61/62/63/67/68/68/71
Able to use T5575,em4305 and the compatible cards to copy 13 chip.
5. Generate chip
Chip 67 and 68: need the unlocked 4D chip to generate.
Specialized 48 chip: able to generate chip for only Seattle TA, VW TA, Skoda TA, Audi TA, SEAT TP, VW TP, Skoda TP, Audi TP and Jetta
Note:
1. Language: English, Spanish(Need to book)
2. This Device can't work together with CN1 or CN2 Chip, need to work with specially designed Handy Baby King Chip and Handy Baby Super Chip
3. Update Free Online on Offcial Website
Package including:
1pc x Handy Baby host |
|
|
| |
배송정보
배송 방법 : Korean Express, POST, DHL, FedEx, UPS, EMS
배송 지역 : 중국-대한민국 (해외직송)
배송 기간 : 3일 ~ 10일
배송 비용 : Korean Express, POST배송을 선택하시면 자동으로 배송비 계신드립니다.
DHL, FedEx, UPS, EMS 로 물건을 받으시고 싶은 경우는 문의해주시길 바랍니다.
❗❗고객님께서 구입하시는 상품의 조합에 의해, 보퉁 배송료에 추가된 배송료가 걸리는 경우가 있습니다.
◼️물건 중에 배터리가 들어갈 때
◼️로고/상표가 붙어있는 상품을 주문하시는 경우
◼️산간벽지, 도서지방, 제주도는 별도의 추가금액이 발생할 수 있습니다.
교환 및 반품시 유의사항
※ 상품 수령일로부터 주말, 공휴일을 제외한 7일 이내에 교환과 반품이 가능합니다.
※ 고객님의 마음이 바뀌어 교환, 반품을 하실 경우 상품반송 비용은 고객님께서 부담하셔야 합니다. (색상 교환, 사이즈 교환 등 포함)
※ 오배송/불량/파손의 경우 사진과 동영상등의 첨부자료가 요구될 수 있습니다.
※ 대량생산시 발생할 수 있는 미흡한 마감처리 부분(실밥, 박음질, 초크자국 등)은 불량사유가 될 수 없습니다.
단, 다음의 경우에는 교환/반품 가능기간임에도 불구하고 거절될 수 있습니다.
※ 본품 또는 사은품이 고객님의 책임 있는 사유로 멸실 또는 훼손된 경우
※ 고객님의 사용 또는 일부 소비에 의하여 상품 등의 가치가 떨어진 경우
※ 제품 수선/착용/세탁한 경우
※ 제품 관련하여 포장을 개봉하였거나 파손한 경우
※ 세트 상품 구매 후 일부만 보낼 경우
황씨열쇠 한국업무담당 Tomato
직통문의전화：0086-755-2664-5544
Skype ID：lockpick.cn 【개별 상담】
E-Mail：tomato@lockpick.cn
tomatolockpick@naver.com
|
| |
|
|
|
